Commercial Door
Division
Our Products
Doors
& Frames Division 8
Steel Doors &
Frames CECO Door
Products, Republic, Pioneer, Karpen Steel, HMF, Lindstrom
Flush Wood Doors Graham, Algoma, Oshkosh, Mohawk, Marshfield & VT
Industries
Wood Stile & Rail
Doors Lag Design,
Harring, Algoma, Marshfield & VT Industries
FRP Doors Special-Lite, Warminster, Corrim,
Commercial Door Systems (CDS) & Tiger Door
Stainless Steel Ceco, Next Door Co., Stainless
Doors, Inc. & HMF
Accordion Doors (Room
Dividers) Woodfold
Access Doors Karp, J.L. Industries & Acudor
Products
Hardware
Division 8
Hinges & Pivots Hager, McKinney, Stanley, Bommer & Cal-Royal
Continuous Hinges Roton, McKinney, Markar & Select
Bolts (Surface & Flush) Hager, Ives, Stanley
& McKinney
Locks & Latches Corbin Russwin, Yale, Schlage,
Hager, Cal-Royal, PDQ & Best
Exit Devices Yale, Corbin Russwin, Hager,
Cal-Royal, Detex, Alarm lock & Adams-Rite
Closers (Surface, Concealed & Floor) Norton, Corbin Russwin, Yale,
Hager & Cal-Royal
Flat Goods Hager, McKinney, Trimco, Rockwood, Burns, Ives &
Baldwin
Stops and Holders Hager, McKinney, Trimco, Rockwood, Burns, Ives &
Baldwin
Miscellaneous Hardware
Hager, McKinney, Trimco,
Rockwood, Burns, Ives & Baldwin
Weather-strip &
Thresholds Pemko,
National Guard, Zero & Reese
Electrified Hardware SDC, Securitron, Rutherford &
HES
Key Cabinets Telkee, Aladdin, Lund & MMF
|
Hinges
|
Cylindrical Locks
|
Mortise Locks
|
Exit Devices
|
|
Door Closers
|
Deadlocks
|
Electrified Hardware
|
Overhead Stops
|
Toilet
Partitions Division 10
Baked Enamel, Constructed
of galvannealed sheet metal finished with either powder coat or sprayed enamel
then oven baked By: Global, Knickerbocker & Mills
Solid Phenolic Core, Constructed
of solid phenolic core with a high pressure decorative matte surface as an
integral part of the core material By: Bobrick,
Columbia,
Mills, Hadrian & Partition Systems
Plastic Laminate, Constructed
of a sandwich of high pressure decorative plastic laminate bonded to a solid
industrial-grade particle board core By: Bobrick,
Mills & Knickerbocker
Solid Plastic (High
Density Polyethylene), Constructed of solid 1 thick plastic material (HDPE)
or High Density Polypropylene By: Scranton
Products (Santana, Comtec, and Capitol), Hadrian, Mills, & Columbia
Stainless Steel, Constructed
of stainless steel #304 with a #4 directional satin finish By: Hadrian,
Knickerbocker, Mills & Global
Available in overhead
braced, ceiling mounted and floor braced.
Budget Pricing
The
following chart illustrates the relative pricing of various types of
partitions.
|
 Material
|
Relative Price
|
|
Plastic
Laminate
|
Least
Expensive Alternative
|
|
Baked
Enamel
|
1.04 x
Plastic Laminate Cost
|
|
Solid
Plastic
|
1.75 x Plastic
Laminate Cost
|
|
Phenolic
|
1.75 x
Plastic Laminate Cost
|
|
Stainless
Steel
|
2.9 x
Plastic Laminate Cost
|
|
Corianฎ
|
6.5 x
Plastic Laminate Cost
|
Floor
Mounted Overhead Braced (shown)
Washroom
Accessories Division 10
Grab Bars, Mirrors,
Soap Dispensers, Paper Towel Dispensers, Hand Dryers, Signs, Baby Changing
Stations, Toilet Paper Holders, Waste Receptacles
By: ASI, A&J, Bobrick & Bradley
|
|
Fire Extinguishers and Cabinets
|
|
|
Larsen, Potter-Roemer & J.L.
Industries
|
|
|
|
Lockers
|
|
ASI, Penco, Lenox, Hadrian &
Scranton Products
|
How are
we different from the rest?
v We offer quality products at
competitive pricing.
v We have large inventories for quick
delivery or easy pick-up.
v With two locations we can easily
service the entire State of Delaware
and surrounding areas.
v Our personnel provide you with an
attitude that no job is to small.
v We specialize in contract jobs with
accurate estimates, complete submittals and timely delivery.
v Our personnel have the technical
experience to solve all your door and hardware problems.
v We have factory direct support from
the biggest and finest manufacturers available.
v Both locations have a complete hollow
metal shop for fast modifications, UL fire ratings, hardware preps and frame
welding.
Helpful Hints:
To Download Our Helpful Hints Click Here (PDF)
Door Swing Chart
